Tail Split Remedy



A ginkgo leaf looks similar to a tail split



After moving my male guppies back into there 10gal aquarium last week I noticed one of my males had a tail split straight down the middle of his tail to the base. Tail splits can occur for many different reasons such as...water parameter changes, fighting, or even getting snagged on aquarium decor. After waiting about 2 days to see if his tail was going to mend itself, it really didn't seem to be so I took a shot at trying to correct the issue.

I decided to pour in a bit of PimaFix (originally I was going to try Melafix but I couldn't locate my bottle of it) into my 10gal aquarium. By the next day I shocked to see that his tail was halfway repaired! So I continued putting in 1-2 capfuls of PimaFix into the aquarium every day (I actually didn't remove the carbon from my filtration either) and in under a week, his tail split was basically gone. Click here to see how it helped my gold barbs in the past as well.

What's PimaFix?
PimaFix's active ingredient is Pimenta Racemosa (1.0% in the API brand I used) which is a bay rum oil that comes from the West Indian bay tree (or bay rum tree) which is part of the myrtle tree family. Common remedy uses for Pimenta Racemosa are for colds, flu's, digestion and insect repellent. PimaFix claims to rapidly treat internal and external fungal infections on fish as it's an anti-fungal product. It also claims to help cottony growth and reddening on fins and body.

Guppy Updates

Today my first guppy (the original store bought pregnant guppy that started this strain) gave birth to her sons fry (yes, that sounds weird but true). I now have at least 20+ new fry and I believe her daughters are also pregnant from there brothers so, I'm sure I'll end up with more fry at some point in the near future. I am hoping that with my new fry I will be able to perfect the strain a bit however, there are many other factors to consider but I'd rather not make things too complicated. In the mean time, I have 3 months before the new fry has mature males to breed (from my past experience it usually takes the females twice as long to fully mature for breeding) and I have put the mature males into a separate tank from the females and new fry as I don't want them to breed together again. Keep in mind that a female guppy can continue giving birth months after she has dropped one batch of fry without having mated again (this additional batch has always been a low number of new fry for me though as it's generally just one fry born but I'm sure it could vary).

How to Remove Nitrite

Nitrite NO2 Ion

After having cleaned out my entire 10gal aquarium (as you may have seen from my previous posts) and replacing all the gravel substrate I didn't check my water quality since I had ran out of test strips and had added my male guppies to the tank within 24hrs I believe (obviously the tank needed to cycle). Well, that resulted in losing one of my male guppies after a few days (the reason why my guppies weren't being active in the first place) and luckily I was able to move my 2 remaining male guppies back into there old aquarium with the females and they made a speedy full recovery in 1-3days.

So now that I have test strips I realized, yes, I did have a nitrite issue (no ammonia though in case you were wondering). The only time I ever have a nitrite issue is when I replace the substrate. Generally I'd clean the entire tank out again (rinsing all the decor and such as well) and it would rid me of my nitrite issue (which sounds weird but it has worked for me in the past). So I decided I didn't want to go through the headache of cleaning my tank out again and wanted to find a product that could rid my tank of nitrite (as my nitrite level ranged from 0.5 - 3.0).

I was extremely skeptical I'd even find a product that could actually eliminate nitrite, especially having really hard well-water, which is generally pretty stubborn to alter. So, I went into PetSmart having no luck finding what I had initially been looking for and then I finally found ONE product in the whole store that day (which happened to be a bit pricey as well), it being my only option without having to go on a major product hunt I purchased a small bottle of... Tetra SafeStart.

I got home, followed the directions... removed the carbon filter, shook the bottle of Tetra SafeStart and poured in 1/3 of the bottle into my 10gal tank. Less then 10hrs later I tested the water and...NO nitrite whatsoever! It's seriously a miracle product which I can now recommend to you if you're battling nitrite. This product also claims to remove ammonia although, I had no ammonia so I'm not sure if it will combat that or not.

*Update* It has been months now since using Tetra SafeStart and I have not had a nitrite issue since I first began using this product. I know how some products can seem to work for a very short time (if at all) but that was not an issue when I used this. Or it is possible this product worked long enough for my tank to catch up in the cycling process before this product could have possibly ever worn off. So, I still really recommend trying this if you're having similar issues as I did because it worked perfectly for me.

Rain Water pH

According to Wikipedia the pH in rain water can vary depending on your location. Since it has been pouring rain here recently (around the DC area) I decided to make the best of it by capturing some falling rain drops in a cup and then testing it using the Tetra 6-in-1 EasyStrips.

My Results...

Nitrate = 0 Safe
Nitrite = 0 Safe
Hardness/GH = 0 Very Soft
Chlorine = 0 Safe
Alkalinity/KH = 0 Low
pH = 6.2 Acidic