Aqueon QuietFlow 30 Power Filter - Review

There wasn't a free thermometer BTW.

Having recently purchased the Fluval AquaClear 50 power filter after reading all the rave reviews online, I found that after I observed the unit for myself that it wasn't going to be good for cleaning my aquarium. So, I exchanged the AquaClear for the Aqueon QuietFlow 30 because I do really like the Aqueon QuietFlow 20 and the 30 is around $10 less than the AquaClear and does the same GPH (Gallons Per Hour) although it doesn't have all the media things that the AquaClear has (the design of the AquaClear doesn't force water through all the media anyway, thus rendering all that media practically useless and even more costly with long term use in mind). If I had to recommend a Fluval power filter to try out I'd go with the Fluval C3 (although it only does 153 GPH and seems to be slightly pricier than its AquaClear cousin) because water is forced through all the media unlike with the AquaClear power filters, which makes the C-series seem more similar to QuietFlow's in that aspect(although the Fluval C-series appears more annoyingly complex in my opinion).

Aqueon QuietFlow 30 Power Filter and 'Large' carbon media cartridge

As for size difference with the Aqueon QuietFlow30 compared to the 20, the intake tube appears to be exactly the same in size, the box is around 1in longer and maybe 2mm wider, and the motor is also longer by about an inch. The 20 and bigger sized power filters all take the "Large" size cartridge's although the 90 takes 2 of the cartridges so, it's really only the GPH that changes between the 20 and 30. The 50 is slightly bigger than the 30 (as expected), but the intake tube changes to a wider tube with a longer vent area. A downfall I recently noticed is that the fan inside the motor (which is directly above the intake tube) can't be easily removed for cleaning so, if you have fish with a big bio-load (like goldfish) than you may find the buildup to block the fan from functioning (thus this filter will be rendered useless until fixed/cleaned).

As you can see from the above photos the media cartridge does not contain that much carbon (probably its biggest downfall if you're a carbon addict). The media box of the 30 does change compared to the 20 as it has some slats where the water first comes into the box from the intake tube (not sure the true reason for that), and thus far I do find the unit nosier than the 20 but also much more powerful (so it only makes sense I suppose that it would be nosier). There is also some room in the box if you wanted to add in some additional media.

The QuietFlow 30 with a Fluval pre-filter attached

As for extra's I put onto my Aqueon QuietFlow 30 I added on the Fluval Edge pre-filter sponge (fairly inexpensive and I like the soft texture of these ones) which fits perfects on the 20 and 30 (this pre-filter would be too small for the 50 and up, and I think the 10 also has the same size intake tube as the 20 and 30). The intake tubes are also adjustable by sliding the adjoining tubes up or down, the picture above shows it at its shortest length (I don't really care for the tubes longest possible length as it gets too wobbly for my preference).

Overall, I do recommend the Aqueon QuietFlow power filters, they work great compared to other LPS (Local Pet Store) HOB power filters I've tried in the past as they're pretty decent at cleaning. I reuse the cartridges for months at a time as they're pretty durable with weekly cleanings (thus saving money on cartridges in the long run). These aren't overly noisy although sometimes the filter cover on top tends to vibrate a bit (but with a little adjusting on occasion it stops). I also like how the cord tucks into the side of the unit and also how the motor is in the water and not outside the box (no having to worry about leaks or priming it with water to start up). The blue waterfall piece can be removed easily and cleaned, it allows water to drip down onto the waterfall bridge and it's pretty helpful at catching bigger debris (which I think is nice for those with planted tanks). One draw back I think may be an issue is the width of the unit in the tank, it seems to be too wide for a lot of aquarium hoods/tops (but since I only have a glass top I just pull it forward a bit to accommodate the unit, doesn't really bother me). I'd suggest the 30 for tanks bigger than 10-gal (as it made my 10-gal pretty darn turbulent) as it's probably better suited for a minimum of 20-gal, and it claims to also work for saltwater aquariums as well (if you do have a saltwater aquarium I'd recommend getting at least the 30 or higher models), and the 20 works fine for a 10-gal.

Meet Meko

Sadly while I had taken an unexpected week long trip my fish sitter had informed me that Ebo was not looking so good, a few days later he passed on to the big fish bowl in the sky. However, I now have a very awesome new veil-tail betta I got from PetSmart this past weekend and his name is Meko. I picked that name because my betta's seem to follow a pattern of their names ending in 'o', the 'k' is his own unique letter, the 'e' is to carry on Ebo's memory, and the 'm' is to carry on the beloved Mr. Moto's memory. While Ebo was a green-blue color, and Moto was a blue-black color, Meko is a blue-red color... I wish I could have found a betta that wasn't so blue but ultimately I picked him over the rest regardless. Meko does seem to have one flaw currently... his right fin-side gill seems to always be flared out slightly so I am currently trying to treat him to see if it changes.

Meko

Unlike my past betta's Meko seems to be a picky eater as he does not care for the usual Aqueon floating pellets. I had yet to find a betta that didn't like bloodworms, that did seem to catch his interest and get him eating. BTW I don't recommend the Aqueon Betta Treat Bloodworms, they're a bit too big for betta's in comparison to the Hikari brand which has smaller and redder colored bloodworms (I do recommend those ones as they seem better quality in my opinion). I even tried to pass the Aqueon pellets onto my hungry mollies but they too didn't care for them.

It was by chance that I tried out some new goldfish pellets which I just bought for my expecting ranchu, the New Life Spectrum 1mm goldfish pellets. Not only were the NLS pellets about half the size (probably a bit more than that even) of Aqueons but they were actually a better size for the small mouth of my betta. Shockingly, Meko LOVES them (his gills even flare open at times and he quickly gobbles them up, two at a time if he can)... although he refuses to eat the ones that sink to the bottom, fair enough. He even prefers the NLS pellets over the Aqueon bloodworms, he just goes crazy for the NLS pellets, it's awesome to see (I kind of feel bad for my past betta's seeing how happy Meko is with this new food). I had never seen a betta fish eat so much, so now I'm buying Meko the NLS for betta's (the cheapest I found for this food was on eBay for $8.99), and while this may be a bit pricey for betta food it will last a very long time as betta fish do not eat that much (eh, normally).

I also did some research on NLS for betta's online and was surprised to find that so many people and betta breeders were highly recommending it. I also found it interesting that people were mentioning that it may not have the highest amount of protein compared to other betta foods, but they were saying that it's actually a higher quality of protein and food that the betta is getting that matters more, which ultimately seems to make this NLS great for betta's.

*I will try to update this post later down the road when my NLS betta food arrives and let you know what Meko thinks of that. In the mean time here's a good video I found on the NLS food.

R.I.P. Ebo

Aqueon Mini 10W Heater - Review

I have owned the Aqueon Mini Heater for awhile now so, I decided being winter months now that it was a good time to give a 'mini' review on it.

Just to answer a few quick questions you may have...

Does it work? Yes.
Does it use suction cup/s? Yes.
Wireless? No.
Indicator Light? No.
Adjustable temperature? No.
Fully Submersible? Yes.
Size and Color: I'd say it's around 4in x 1in with a 1/2in depth, color is black.

I have been using the Aqueon mini heater for Mr. Moto (my betta fish) in his 2.5 gallon mini bow aquarium (acrylic aquarium). Since Ebo (my newest betta) doesn't have a heater in his habitat it was reading at 70.2F, while Mr. Moto's aquarium with the mini heater was at 76.8F. That being said Aqueon's Mini Heater raised the temperature 6.6F, which seems to be a nice temperature for a small betta tank like Mr.Moto's. Keep in mind that if your tank water is colder/warmer (depending on the outside temp) or your aquarium size is bigger/smaller than the heater may not give the same readings as mine as their are many different variables to consider when using practically any aquarium heater. Their is also no adjustable dial on this device to lower or increase the heat so while it may work for some it may not work for others, but I find it's perfect for my 2.5 mini bow aquarium setup I have. I definitely recommend trying it if you do have a small aquarium setup such as 5 gallons or less.

As a side note this product claims that if you leave it outside of water and plugged in that it has a 'thermal safety shut-off' that will initiate, and the unit will then be rendered unusable after that. As always with aquarium heaters, give the device several days to work in your aquarium setup before judging its performance as heaters can take up to 48hrs to gradually heat the aquarium, this is done purposely as to not shock your fish and cause them to get ill.

Aquarium Updates

Lately I find myself being more focused on the outer setup of my aquarium... wanting to change up some of my wiring setup and so forth. I've been debating 'timers' and I think I will actually do a quick post on them to help anyone else looking to use timers for their aquarium setup. I'm still wanting to purchase a canister filter at some point and I'm also looking for another light fixture. I'm also becoming disappointed with one of my Zilla Digital Thermometers so I'll either exchange it or perhaps find something better (any suggestions?). I'm also working on creating my own DIY aquarium lid (if I can figure out what parts I'm in need of) which I think will be very cool so, for those of you out their that may not be fans of bulky aquarium hoods that want something a bit more invisible then you may also be interested in that as well.

As for new things I recently purchased one of Petco's "zebra stones" which I believe is just a chunk of granite, and I'm hoping to find some additional pieces of the stone in the future but each piece is different so it's only a matter of finding ones that appeal to my wants. Also big news, I finally caved and bought another Betta fish yesterday and he's a halfmoon double tail whom I have named Ebo. So, if you want to see pics of Ebo and know more about him then you'll have to come check him out in future posts to come as well... although I may actually be returning him because I noticed he has fin rot and I haven't yet found a decent fin rot remedy thus far.

I've also recently donated an old 10gal aquarium and Top Fin heater to a co-worker of mine who has got on the 'fish boat' with me, YEAH! haha. So now I have my new Aqueon heater in my female guppy tank and they are super happy with that, I even added an undergravel bubbler from Walmart to their tank. Also I think I may have posted before about my homes water system being changed out and my water went from 'Very Hard' to 'Soft', and has now turned 'Very Soft"... I'm not sure how this will affect my fish but I really wish the pH would go down on our tap water, eep. For now I believe that's it for my recent aquarium updates and if you have any questions or comments please feel free to ask :)

Aquarium Lighting

After a visit to my cousins house recently and hearing my Mother exclaim "Wow, you can really see the fish in his tank!" it made me think how my aquarium lights were lacking in brightness. Then again, I had been going for a faux blackwater style setup awhile back and have become a bit bored with that at the moment. So, I came across an interesting little post while surfing the net about some great cheap aquarium light bulbs at... Walmart of all places. I couldn't help but check out these bulbs at my local Walmart, and well... I'll let you be the bulb judge here (you may be just as shocked as I was!).

Current Aquarium Lighting.
Two of IKEA's G4 12V LED's (these bulbs do not last long!), possibly comparable to these...

Started off with this Aquarium Lighting.
Two, 25W Blue Incandescent Aquarium Bulbs...

Second choice to lighting my Aquarium in the past.
A Single Fluorescent Tube (light bulb came with that unit)...

My most recent light venture.
Two of Walmart's, 10W Aquarium Bulbs (these may be comparable to Aqueon's Colormax)...

Yes, I do realize that these photo's may look like I had went from a dirty looking aquarium to a clean aquarium but it's honestly just the difference that lighting can make.

Petco Online Rep Experience

I often feel like most people (or at least myself) with pet fish (or perhaps not just with fish) often question another persons aquatic,etc advice. I often find doing research and experimenting is generally the best route to take (that's why I have this blog in the first place, right?! hah). Onto my point...

I recently decided to see how Petco's Online Interactive Rep Chat was and I quickly began talking to an online Petco representative named "Abby" whom I asked "aside from appearances, what is the difference between the Aqueon Pro and the regular Aqueon aquarium heater?". The response I ultimately got from her was based on the customer reviews she had read, and so Abby's response was that the Pro series supposedly lasts longer. Seriously, that's all that she could tell me...well, that and how they currently are having a sale on the item (like duh, its Black Friday week, heh).

Overall, this Petco Chat help line was not really anymore helpful to me than what I could have learned on my own and both of these items have a lifetime warranty. So, her response really tells me that aside from looks... they are the same. Was this the response I was looking for...not really, I was desiring more since both the items according to her are basically the same since I know they both have a lifetime warranty, and yet the Pro costs more, and... for what reason? Well, we already know Abby can't really help us so... that's where I come in.

Actually, I already knew the answer as to what the difference was between the two heaters (or at least one) from my own personal knowledge. The difference is that the Pro heater is fully submersible underwater which allows it to be added anywhere inside the aquarium and positioned in any direction; the regular heater can only be positioned vertically as the top part of the device is marked showing a waterline, this waterline means that you are not suppose to fully submerse this heater underwater. Although they both say on the label they are "submersible" this does not mean they are fully submersible however, you may not realize this until you open the package and read the directions/warnings inside. Although, one way to know if it is or not is to look at the device itself and if it shows a marked waterline on it, then it's more than likely NOT fully submersible.

So, based on this Petco experience, I really doubt I'll be asking them for advice online anytime soon. Of course if they start getting more knowledgeable people working for them I might ask for advice, but even then I'll probably still be a bit skeptic.

*Aside from other things on Petco I came across their fish forum online and I could not agree more with THIS article on fish rights which, I think all us fish fanatics and lovers can agree with, thanks TacoLuv for posting.

Recent Aquarium Setup - Part 1

I decided to create a blackwater style aquarium however, it's not a true biotope and I think it looks nice for fall time which is really just around the corner. I put only my male guppies in this tank to separate them from my females and also because their colors looked nice with the foliage. I am considering buying a few tetra's to add to this setup (won't say which ones yet, it'll be a surprise!).

Click to Enlarge

To achieve this look was pretty cheap, I bought a 25lb bag of black gravel (Petco) however, I think half the bag would've been a decent amount of substrate for my 10gal as this looks a bit much for my personal preference. On the plus side, I want to get rid of the black and white gravel in my other 10gal, so when I get around to cleaning that tank then I'll probably remove half the substrate from my new tank into that one (helps prevent new tank syndrome as well).

I found a 5ft faux maple leaf garland and a faux oak bouquet at the Dollar Tree. I rinsed these as their was a small amount of dye that washed off from them. I then placed the maple garland at the bottom of the tank, poured my gravel on top and pulled up a few of the maple leaves out from the gravel. As a side note, if you cut the stem off from the leaf it does not float on top the water but rather sinks to the bottom. I then had some smooth black substrate stones (Petco) and placed a handful or two of those around the top of the gravel to help break up the overly gravel look it was giving off in the tank.

The piece of Mopani driftwood in my tank I have had for awhile now which I also got from the pet store. I had originally planned to find some dry branches to clean and put into the tank but haven't got around to that yet. I cut the stems off of my oak leaf bouquet, only leaving 2 stems attached to the original base, then I lightly pushed and arranged the stems into the gravel behind the Mopani.

I did buy a new aquarium heater which claims to heat up to 20 gallons, it's fully submersible and is made by Aqueon (I will do a review of this at some point). Once I get the temperature set properly in this tank I'll move it from the side of the tank to the back. I also bought a new filter cartridge for my 20gal Aqueon filter because I only had the medium sized cartridges and needed large ones for this model.

I cut open a brown paper Pollo bag which I had on hand and used it as my background, and I think it turned out better than I was expecting. However, I'm thinking of switching out the paper bag with a black trash bag. The black background will allow better viewing so that the filter intake tube and my new tank heater won't look as visible.

The green breeding grass (Petco) floating on top the water was just intended to be temporary to help the guppies feel more at ease since I took it out of my other tank setup. Also the lighting is from an aquarium hood (Petco) which I had previously as I haven't setup the other light fixture (IKEA) for this tank yet, once its changed the water won't look as bright white but more yellow in color.

That's it for my new setup, let me know your thoughts or comments.